Appliance Installation Services in Austin, TX | All Austin Repairs

Dishwasher Installation

Dishwasher installation is simple with us. We slide the dishwasher under your counter and make sure it’s level and doesn’t leak. We secure the water line and drain pipe tight to prevent leaks. Then, we plug it into a safe outlet. After that, we run a quick test to check that it works and doesn’t spill water. Our team cleans up after every appliance installation, leaving your kitchen neat. For a garbage disposal installation, read our blog post for an easy, step-by-step DIY guide.

Oven Installation

Oven installation requires careful attention to detail to get it right. At All Austin Repairs, we carefully place the oven in its designated spot and make sure it’s level. For electric ovens, we connect wires to a safe power source. For gas ovens, we hook up the gas line tight to prevent any leaks. We test the oven by turning it on and checking if it heats up properly. After every appliance installation, we clean up the area so your kitchen looks great.

Microwave Installation

Microwave installation is quick with our team. We mount it above the stove or fit it into a cabinet space. We make sure it’s level and secure so it stays in place. We plug it into a grounded outlet and test the buttons and heat settings. If it’s a combo unit with a vent, we connect the vent pipe properly in accordance with state installation codes. Our appliance installation leaves your microwave ready to use in your Austin home.

Range Hood Installation

Range hood installation helps keep your kitchen fresh and clean. We set the hood above your stove and level it flat. We connect it to a power source and attach the vent pipe to push out smoke and smells. Then, we test the fan and lights to make sure they work. Every appliance installation is done neatly, so your kitchen stays clean and safe.

Refrigerator Installation

For refrigerator installation, we select a spot with good airflow. We move the fridge in and level its feet so it stands steady. We plug it into a grounded outlet. If it has an ice maker, we connect the water line to the water supply valve in the wall. We wait to see if there is no leak before turning it on to let it settle. Then, we test the doors to make sure they close tight for every appliance installation.

Washer Installation

Washer installation starts with a flat spot. We connect the hot and cold water hoses to your taps. The drain hose connects to a pipe or sink, allowing water to flow out during a drain cycle. We plug the washer in and make sure it’s level. Then, we run an empty cycle to check for leaks or noises. Our appliance installation keeps your washer working great in Austin homes.

Dryer Installation

Dryer installation needs a good vent to push out hot air. We set the dryer in place and level it so it doesn’t shake. We plug it into a strong outlet and attach the exhaust vent pipe. Afterwards, we test it with a small load to make sure it spins and heats properly. Every appliance installation we do is clean and safe for your home.

Cooktop Installation

Cooktop installation is a big job, but we make it easy. We fit the cooktop into your counter space and level it flat. For electric ones, we wire them to a safe power source. For gas, we connect the gas line carefully to avoid gas leaks. We test the burners to make sure they heat up properly. Our appliance installation follows all Austin safety rules and state codes.